Filter
Top Products
Stereo Operation
+L–
+R–
Input
2-Ch.
{
+ –
+ –
Rear XCard
Front XCard
4 ohm 4 ohm
*Note: XCard can be inserted in HP, LP, or Full Range
Rear XCard*
Front XCard*
LP
LP
2-Channel Input
– R +– L+
• RCAs are connected to front inputs
• Signal Input Switch set to 2-channel input
• Gain for front and rear must be set equally to balance left and right
channels
• Impedance for left bridged channel should be no less than 4Ω
• Impedance for right bridged channel should be no less than 4Ω
• XCards for front and rear are set identically as High-Pass, Low-Pass or
Full Range
– 16 –