Filter
Top Products
8-10 IDLE CONTROL UNIT
(RGV12000 only)
Check the resistance between five terminals
of IDLE CONTROL UNIT with circuit tester.
Terminal number of the IDLE CONTROL
UNIT
Circuit tester (with battery
power source 1.5 V)
Apply black 0 needle of the circuit breaker
needle of the cir-
*Tester measuring range : 1000 k Q
NOTE : The resistance readings vary depending on the types of circuit testers.
The above table shows an example of the resistance readings measured by an ordi-
nary analogue circuit tester with 1.5 volt battery power source.
it is advisable for you to check the resistance readings using your standard circuit
tester and revise the checking table.
- 31-