11. Touch the Tuning Up/Down button to select the correct month and
then touch the Select button to confi rm the setting.
12. Touch the Tuning Up/Down button to select the correct day and then
touch the Select button to confi rm the setting.
13. The alarm has now been set and the radio will revert to the previous
time or radio display. The alarm symbol (bell) will appear on the
display.
When the alarm is set to wake by radio, the last used station will be
switched on at the alarm time.
While the alarm is sounding, normal radio controls are not available (except
for the volume control). The alarm indicator (bell) will fl ash.
If the buzzer alarm is used, the volume will start from minimum and
increase in level every few seconds. The alarm will sound for 60 minutes
unless cancelled.
To cancel the alarm
1. While an alarm is sounding it can be cancelled for 24 hours by touching
the Standby button. The alarm will then be rescheduled as needed
according to its settings.
Note: Touching the Standby button once during a radio alarm cancels
the alarm but allows the radio to continue playing. Touching the Standby
button a second time will put the radio back into standby mode.
11,12
11,12
11,12
1
31