Filter
Top Products
If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
6
Operating your radio - DAB
1. Carefully extend the telescopic aerial.
2. Press the
On/Off button to switch on your radio. The display will show
"Roberts" for a few seconds.
3. If this is the rst time the radio is used a quick scan of UK Band III
DAB channels will be carried out. The display will show "Autotune
Quick scan". If the radio has been used before the last used station
will be selected.
4. During Autotune, as new stations are detected the station counter
on the right hand side of the display will increase and stations will be
added to the list. The top line of the display shows a bargraph indicat-
ing progress of autotune.
5. When the Autotune is completed the rst station (in numeric-alpha
order 0...9...A....Z) will be selected.
6. If the station list is still empty after the Autotune your radio will display
"No Signal".
7. If no signals are found it may be necessary to relocate your radio to
a position giving better reception.
2