Roberts Radio RD-49 Radio User Manual


 
If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
16
System reset
If your radio fails to operate correctly, or some digits on the display are
missing or incomplete carry out the following procedure.
1. Press and hold down the
Menu/Info button for 2 seconds "Software"
will be displayed.
2. Press the
Tuning Up/Down buttons until the display shows "or
SELECT Factory reset".
3. Press in and release the
Select button to select System reset.
4. Press the
Select button, a full reset will be performed. All presets and
station lists will be erased.
5. After a system reset a scan of the DAB band will be performed.
In case of malfunction due to electrostatic discharge, reset the product
(reconnection of power source may be required) to resume normal
operation.
If a problem persists our technical staff would be pleased to of-
fer any assistance on operating the radio. Our technical helpline
number is 020 8758 0338.
Recalling a preset
1. Press the On/Off button to switch on your radio.
2. Select the required waveband.
3. Momentarily press the required
Preset button, your radio will tune to
the station stored in preset memory.
1
3
1
2
3,4