Filter
Top Products
If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
12
Operating your radio - FM
1. Carefully extend the telescopic aerial.
2. Press the
On/Off button to switch on your radio. The display will show
"Roberts" for a few seconds.
3. Press the
Band button to select the FM band.
4. Press and release the
Select button until the display shows "Auto
tune <>".
5. Press the
Tuning Up button your radio will scan in an upwards
direction (low frequency to high frequency) and stop automatically
when it nds a station of sufcient strength.
6. After a few seconds the display will update and show station name
(if RDS information is available).
7. Press the
Tuning Down button to scan the FM band in a downwards
direction (high frequency to low frequency).
8. When the waveband end is reached your radio will recommence tuning
from the opposite waveband end.
9. Adjust the
Volume control to the required setting.
10. To switch off your radio press the
On/Off button.
3
2
5
4
7