13
Manual tuning - FM
1. Press the On/Off button to switch on your radio.
2. Press the
Band button to select the FM band. Fully extend the Tel-
escopic aerial.
3. Press and release the
Select button until the display shows "Manual
tune <>".
4. Press either the
Tuning Up or Down buttons to tune to a station.
The frequency will change in steps of 50kHz.
5. When the waveband end is reached the radio will recommence tuning
from the opposite waveband end.
6. Set the
Volume control to the required setting.
7. To switch off your radio press the
On/Off button.
2
1
4
3