Filter
Top Products
9
1
Finding new stations - DAB
As time passes new stations may become available. To nd new stations
proceed as follows:-
1. Press and release the
Auto Tune button, the display will show
"Autotune Quick scan". Your radio will perform a scan of the UK DAB
frequencies. As new stations are found the station counter on the
right-hand side of the display will increase and stations will be added
to the list.
2. To carry out a full scan of the entire DAB Band III frequencies press and
hold down the Auto Tune button for more than 2 seconds and then
release. The display will show "Autotune Full scan". As new stations
are found the station counter on the right-hand side of the display will
increase and stations will be added to the list.
Signal strength display - DAB
1. Press and release the Select button until the display will show signal
strength.
2. Position your radio and carefully angle the telescopic aerial for best
reception using the signal strength display as a guide. Move your
radio around and position so as to give maximum number of black
rectangles on signal strength display. The clear unlled rectangle
indicates minimum signal level required for satisfactory reception.
3. Press the
Select button to exit the signal strength display.
2
1,3