If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
Nap timer
The Nap timer facility allows you to set your radio to wake you after a
predetermined interval (up to 2 hours) without needing to set the alarm.
The nap timer can be set when your radio is switched on or in stand-by
mode. The nap timer should only be used when the radio is powered from
the mains. The radio's clock does not operate when the radio is in standby
and powered solely from its batteries.
1. Press the On/Off button to switch on the radio if required.
2. Press the Menu button once or twice as needed until "Main Menu"
appears on the display. Rotate the Tuning/Select control until "Utility"
shows on the display.
3. Press and release the Tuning/Select control to enter the Utility menu
and rotate until "Nap" appears on the display. Press and release the
Tuning/Select control to enter Nap timer setup.
4. Rotate the Tuning/Select control until the required Nap time setting
is selected. Press Tuning/Select control to confi rm the setting. The
Nap timer can be set to between 5 and 120 minutes (in 5 minute
increments) or to Off.
5. The Nap Timer indicator
will show on the display when in
stand-by mode. When the selected Nap timer has elapsed, the buzzer
will sound.
6. To cancel the buzzer press the On/Off button.To disable the Nap timer
go back into the Nap timer settings (steps 1 to 4 above) and select
the Off option in step 4.
1
2
2-6
28