17
Stereo / Mono setting - FM
Your radio will play stereo FM broadcasts in stereo provided that the
received signal is of adequate strength. However, as a stereo signal
becomes weaker the audio signal will become poorer. It may be preferable
to force the radio to play the station in mono in order to reduce the level
of background hiss.
1. Press the On/Off button to switch on your radio.
2. Tune to the required FM radio station as previously described (see
pages 14, 15).
3. Press the Menu button and rotate the Tuning/Select control until
"Mono" shows on the display. Press the Tuning/Select control to
cause the radio station to play the current station in mono.
The Mono override is a temporary setting and is applied to the currently
tuned station only. It is cancelled automatically by tuning to another
station.
4. If you wish to cancel the Mono override while listening to the currently
tuned radio station, press the Menu button and rotate Tuning/Select
control until "Auto" shows on the display. Press the Tuning/Select
control to cause the radio to play the current station in stereo if the
signal is suffi ciently strong.
1
3,4
3,4