Filter
Top Products
8
Squeezebox Owner’s Guide
SLIM DEVICES
Tip: WEP keys consist of a string of ten or twenty-six digits or letters
A through F. WPA passwords are a string of letters, numbers or
punctuation.
Squeezebox connects to your wireless network. If Squeezebox does
not connect to your wireless access point, you can press the LEFT
arrow to go back and fix your settings. If you are still having trouble,
check the Troubleshooting section at the end of this guide.
7. Choose whether you want the Squeezebox to obtain an IP address
automatically using DHCP, or whether you want to assign it a static
IP address. Most networks will let Squeezebox obtain an address
automatically. Press the RIGHT arrow.
If you chose to assign Squeezebox a static IP, enter it using the
numbers on the remote. Press the RIGHT arrow to save the address.
Tip: Use leading zeroes to specify numbers with fewer than 3 digits,
for example, you would enter 010.001.004.281 for 10.1.4.281.
Enter the subnet mask for the network, the default gateway IP
address, and the address of your DNS server, pressing the RIGHT
arrow on the remote to move to each one.
Connecting to SlimServer
1. If SlimServer isn’t already running, start it now.
Squeezebox will scan your local network to find the computer that’s
running SlimServer. If you started SlimServer after configuring
Squeezebox, you may need to scroll to find it.
2. Select the computer you want to use. If you are running SlimServer
on multiple computers on your local network, you can use the DOWN
arrow to scroll to the one you want to use.
3. Press the RIGHT arrow on the remote to connect.
Setup is complete.
Tip: If you want to go back to setup later press the LEFT arrow on the
remote down and hold it for five seconds. Squeezebox will return to
the Set Up Networking menu.