Filter
Top Products
7
Squeezebox Owner’s Guide
SLIM DEVICES
Configuring Squeezebox
When you plug in Squeezebox, the Slim Devices logo is displayed briefly,
followed by a welcome message.
Set Up Networking
1. Press the RIGHT arrow on the remote control. The Set Up Networking
menu option is displayed.
2. Press the RIGHT arrow to enter networking setup.
3. If you have a wired-only Squeezebox, skip to step 7. If you have
a wireless Squeezebox, choose whether you want to connect
Squeezebox to a wireless or wired network by pressing the UP and
DOWN arrows on the remote. When you have made your selection,
press the RIGHT arrow.
4. Squeezebox asks you for your local region or country. Scroll using
the DOWN arrow on the remote until you find the local region. Press
the RIGHT arrow to select your region.
Note: Failure to select the appropriate region may violate local laws.
5. Squeezebox will scan to find your wireless network. Select your
network name (SSID) and press the RIGHT arrow.
If you are in an area where there are multiple wireless networks, you
can scroll down using the remote until you find the one you want to
use. If your router is not broadcasting your network name, you will
need to select “Enter a network name”.
Tip: You can use the number buttons on the remote to enter text as
you might on a cell phone. Use the ADD button on the remote as a
backspace and the PLAY button to insert a letter.
6. If your network is secured with WEP or WPA encryption, you’ll need
to enter the network password or key using the numbers and letters
on the remote and press the RIGHT arrow. If your network supports
more than one type of encryption at a time or is not broadcasting
its SSID, Squeezebox may first ask you to choose your encryption
method first.