RCA SLIM DEVICE Stereo System User Manual


 
20
Squeezebox Owner’s Guide
SLIM DEVICES
Using Squeezebox as a Wireless Bridge
Squeezebox Wireless has both 802.11g and ethernet connections. You can
easily connect non-wireless devices (such as a TiVo, PlayStation, XBox, or
a home theatre PC) to your wireless network. To set up Squeezebox as a
wireless bridge:
1. Plug the device that you want to connect to your wireless network
into the ethernet port on the back of Squeezebox using an ethernet
crossover cable. You can purchase a crossover cable at most retail
computer stores.
2. Press and hold the LEFT arrow on the remote for five seconds to
enter the Squeezebox setup screens.
3. Press UP to scroll to the Set Up Networking selection and press RIGHT.
4. Go through the network setup screens, choosing to connect to a
wireless network and then select your region.
5. You should be presented with the option to turn on wireless bridging.
Select Yes and then press RIGHT.
6. Continue pressing RIGHT to finish setting up your wireless
connection. At the end, your Squeezebox will be acting as a wireless
bridge.
Crossfading Between Tracks
Squeezebox can crossfade between songs. You can change the type of
crossfade or turn it off completely.
1. From the web interface, click Player Settings.
2. From the menu at the top, click Audio.
3. In the Transition section, choose the type of transition you want from
the drop down list and click Change. Choose from:
• Crossfading between the two songs
• Fading in at the beginning of a song
• Fading out at the end of a song
• Fading out and in at song transitions
• No fading at all