Filter
Top Products
27
Note: You cannot select SYNC-1 for
analog recording.
5. After
READY appears, press
g
/ENTER
of the RECORD/PLAYBACK tray.
† disappears, and REC lights steadily.
6. Start playing the source. The CD
recorder starts synchronized recording.
During digital recording, if the input
signal stops for 5 seconds, recording
stops. During analog recording, if the
input signal stops for 20 seconds,
recording stops.
Mixing Recording
You can mix the sound of an analog external
input and a CD placed in the PLAYBACK
tray on a CD-R/RW disc. For example, if you
have a microphone and its amplifier, you
can add narration to your CD. Or you can
mix the sound of your musical instruments
to your CD.
1. Connect the external analog source and
load the discs.
2. Record the external analog source and
then press
g
of the PLAYBACK tray.
Time Display
Press TIME to switch the mode of the time
display. Each time you press
TIME, the
mode changes as follows:
In the Play/Pause Mode
• Elapsed time of the track being played.
• Total elapsed play time of tracks.
• Remaining time of the track being
played.
• Total remaining play time of tracks.
• The total play time and the number of
tracks.
In the Stop Mode
• The total play time and the number of
tracks for both trays.
• Remaining recording time of the disc in
the record tray.
In the Recording Mode
• Elapsed recording time of the track
being recorded.
• Remaining recording time of disc.
Messages
BLANK —AblankCD-R/CD-RWdiscis
set on the tray.
CLOSE — Close the disc tray.
COMPLETE — Dubbing, recording,
finalizing, or erasure has been completed.
DUBB 1X — Normal speed dubbing from
the PLAYBACK tray to the RECORD/
PLAYBACK tray.
DUBB 2X — 2X speed dubbing from the
PLAYBACK tray to the RECORD/
PLAYBACK tray.