Radio Shack CD Player CD Player User Manual


 
17
During program playback, press
B
once to return to the beginning of the
current track. To return to the beginning
of the previous track in the program,
press
B
twice. To playback the next
track in the program, press
C
. You
cannot use the numeric buttons on the
remote control.
When using the remote control, select
the tray by pressing
CD or CD-R before
pressing
F
or
J
.
Searching For a Part of a Track
During playback, hold down
B
or
C
on
the CD recorder and release it when you
find the section you want to listen to.
When using the remote control, select the
tray by pressing
CD or CD-R and then press
and hold
@
or
I
.
Directly Selecting a Track
Press CD or CD-R to select the tray and then
press the numeric buttons on the remote
control to select the track. Playback starts
from the selected track.
To play tracks 1 through 9, simply press the
appropriate button (1 through 9).
To play a track that has a higher number
than 9, press
+10 appropriate number of
times to set the “tens” digit of the track
number, followed by a single button to set
the digit for less than 10.
Notes:
If you press the numeric button in the
pause mode, the CD recorder enters
pause mode at the beginning of the
selected track.
Direct playback is not possible during
shuffle playback and program playback.
Repeat Play
Your CD recorder can repeat a single track,
tracks on both CDs of the PLAYBACK tray
and the RECORD/PLAYBACK tray, a
programmed sequence, or a designated
section.
Repeating One Track
Press REPEAT 1/ALL. REPEAT 1 appears
during playback. The CD recorder plays
back the track repeatedly. If you select
another track in
REPEAT 1 mode, the CD
recorder repeatedly plays back the track you
just selected. You can also select a track in
the stop mode. Press
REPEAT 1/ALL and
then select the track number using the
numeric buttons.
Repeating All of the Tracks
Press REPEAT 1/ALL twice. REPEAT
ALL appears. The CD recorder repeatedly
plays all the tracks on the disc. During
program playback, the CD recorder
repeatedly plays back programmed tracks.