Filter
Top Products
18
When you set discs in both the PLAYBACK
tray and the RECORD/PLAYBACK tray, the
CD recorder repeats all the tracks of each
disc alternately for five cycles and then
stops.
Repeating a Designated Section
(A-B Repeat)
Notes:
• You cannot repeat a designated section
on CD-R/CD-RW discs if they have not
been finalized.
• A section should be designated within a
track. If the track ends or if a different
track is selected before point B is
selected, the CD recorder cancels the
A-B repeat mode.
1. During play, press
REPEAT A-B at the
point where you want to start the
repeat.
REPEAT A- appears.
2. Press
REPEAT A-B again at the point
where you want to finish the repeat.
The CD recorder automatically repeats
the selected part.
You can use
@
or
I
to move through
the CD during A-B repeat.
3. To cancel A-B repeat mode, press
REPEAT A-B,
G
, or OPEN/CLOSE.
Shuffle Play
To set the CD recorder to select and play all
tracks in random order from the loaded
CDs, during play, press
SHUFFLE on the
remote control.
SHUFFLE lights. The CD
recorder starts random play when the
current track finishes. In the stop mode,
press
SHUFFLE then
g
.
If you press
J
during shuffle play, the CD
recorder randomly selects the next track. If
you press
F
, the CD recorder plays the
current track from the beginning.
To cancel shuffle play at any time, press
SHUFFLE once so SHUFFLE disappears.
Note: Shuffle play can be used for both the
PLAYBACK tray and RECORD PLAYBACK
tray simultaneously.
Intro Check
Intro check automatically plays the first 10
seconds of each track on the CD or the
programmed sequence. Press
INTRO
CHECK
on the remote control, then
g
.
INTRO lights. If you press INTRO CHECK
during play, the CD recorder starts intro
check from the next track.
Note: If you press
INTRO CHECK
within 10 seconds from the beginning
of a track, intro check starts from that
track.
To cancel intro check and resume normal
play, press
INTRO CHECK again.
When all the tracks of both discs have been
checked, intro check stops.