Polar S510 Stereo Receiver User Manual


 
C 45C 44
The following displays start to alternate, if you have bike settings in use, as
you enter the Measure mode:
Exercise name Bike name
Time of Day
Current heart rate
BasicUse (E0)/
Exercise set in use(E1-E5)
Bike 1 settings in use
4. If you want to record cycling information, keep the bike still until
your heart rate appears on the display. Press OK to start recording your
exercise.
Or
If you want to record cycling information without heart rate
measurement: after the heart rate reading 00 appears press OK and
start cycling.
Speed,
cadence and
autostart;
underline indicates
that function is set on.
3. Start from Time of Day display by pressing the OK to start measuring
your heart rate. A heart symbol will start flashing and your heart rate in
beats per minute will appear in max. 15 seconds. You have now entered
to the Measure mode. The receiver returns automatically to the Time of
Day display within 5 minutes if there is no heart rate reception.
The following display appears as you enter the Measure mode. You can
change this display to Stopwatch display by pressing the up or down button.
Exercise name
Time of Day
Current heart rate BasicUse (E0)/
Exercise set in use (E1-E5)
S510 S520 manual USA GBR A.pm6 7/2/02, 12:5944-45