Filter
Top Products
B
31B 30
B. RecoHr is displayed.
10. Scroll up or down to adjust the value. Press OK. Recovery Hr appears.
Or
C. Rec. Dist is displayed.
10. Scroll up or down to adjust miles / kilometers.
Press OK.
11. Scroll up or down to adjust feet / hundreds
of meters. Press OK. Recovery DIST appears.
To continue your settings, press the stop button. To return to the Time of
Day display, press and hold the stop button.
Naming Exercise Sets
You can name the exercises, with seven letters, numbers or punctual marks.
The available digits are: 0-9, space, A-Z, a-z, - % / ( ) * + : ?.
1. In the Time of Day display scroll up or down until OPTIONS is displayed.
2. Press OK to enter the Options mode. EXERCISE SET is displayed.
3. Press OK. E0-E5 is displayed.
4. Scroll up or down until desired exercise set (E1 - E5) is displayed.
5. Press and hold signal/light button. Adjustable letter is flashing.
6. Scroll up or down to select the desired mark. Press OK.
7. Repeat previous step until you have chosen all 7 letters.
To continue your settings, press the stop button. To return to the Time of
Day display, press and hold the stop button.
Press and hold signal/
light button to
change the units.
Options
Function Set
OwnCal Fit. Test HR
max
-p
On/OFF
On/OFF
On/OFF
1. In the Time of Day display scroll up or down until OPTIONS is displayed.
2. Press OK to enter the Options mode. EXERCISE SET is displayed.
3. Scroll up or down until FUNCTION SET is displayed.
4. Press OK to start the function settings. OwnCal is displayed.
To set the following functions on you have to set your user information.
If lbs/kg are displayed as you start setting the function on, the wrist
receiver points out that you have not set your all user information.
OwnCal Calorie Counter on/off
If you start from Time of Day display, repeat steps 1-4.
5. Press OK to start setting the OwnCal function. On/OFF starts to flash.
6. Scroll up or down to set the OwnCal on or off. Press OK.
To get the most accurate OwnCal results, update the VO
2max
setting and the
HR
max
setting with clinically measured values (if available). If you do not
know your clinically measured values perform Polar Fitness Test and update
the OwnIndex and HR
max
-p settings in Fitness Test mode.
Turning Functions on/off
S510 S520 manual USA GBR A.pm6 7/2/02, 12:5930-31