Plantronics WG100/B Headphones User Manual


 
Plantronics Savi User Guide 7
2.4 Docking and charging headset
1 Gently push the headset into the charging cradle.
The indicator light on the headset will be solid red to indicate
that the headset battery is charging.
2 Charge for at least 20 minutes prior to the first use.
A full charge takes 3 hours.
CHARGING TIME
20 min .....................
Minimum charge
before first use
3 hours ...................
Full charge
2.3 Fitting headset
The headset comes with a pre-installed ear loop and ear tab. An
optional headband is also provided.
1 To install the headband, rotate the pre-installed ear loop
so the ear loop and headset are aligned with one another
as shown. Gently unsnap the ear loop from the headset.
NOTE The headset or ear loop can be damaged if they are not
aligned with one another before removing.
2 Hold the headband so it is aligned to receive the headset
as shown and snap the headband into the headset.
3 Adjust the headband to fit.
4 For either wearing option, rotate the headset until the
microphone is pointed towards your mouth.
5 The headset can be converted for wearing on the left or
right ear with both ear loop and headband.
Indicator light
Power indicator light
Headset
Ear loop
Headband
Ear tab
6 The ear tab has been designed to maximise stability of
the headset. It can be rotated on the headset to optimise
its fit and comfort in the ear. If desired, the ear tab can be
removed by pulling the tab from the headset.
NOTE The USB charging cable can also be used to charge the
headset. To successfully charge your headset with the USB cable,
the PC must be on and in an active state (not standby). The
charging time will vary according to the number of other devices
drawing power from the PC’s USB port(s).