Filter
Top Products
Default Phone Line for Outbound Calls
Set the preferred phone line for outbound calls when you press the headset call control button.
To change the default outbound line with the base see Change your default outbound line.
Auto Answer
When enabled, this feature will configure your headset to automatically answer a call when it
is removed from the charge cradle.
Microsoft Office Communicator/Lync Dial Tone
This feature enables/disables mobile phone voice commands for hands-free dialing with your
mobile phone. When this is enabled, you will be prompted for voice commands by your mobile
phone when a call is initiated with the base mobile button. This feature requires mobile phone
support for voice commands.
If this feature is selected, when a PC radio link is established, Microsoft Office Communicator/
Lync will assume the user is trying to place a VoIP call and provide a dial tone.
If this feature is not selected, when a PC radio link is established, Microsoft Office
Communicator/Lync will sit idle.
Audio Sensing
Audio Sensing is a special feature supported by Plantronics wireless devices that can detect an
audio signal at the USB port and automatically establish the radio link between the base and
the wireless headset without the user having to press the call control button. When the
Configure Lync Dial Tone parameter is set to On, every time the user presses the call control
button, the Lync dial tone will be heard (assuming the user wants to make a softphone call).
However, the user may have pressed the call control button to listen to PC music, etc., and
does not want to hear the dial tone. In this case, if the user sets the Audio Sensing parameter
to On, the radio link will be established automatically when any PC audio is detected at the
USB port, thus eliminating the need for the user to press the call control button.
Second Inbound Call
When you are on a call and a second call comes in, this feature enables you to control the ring
behavior for the second call. The options are for the call to Ring Continuously until answered
(default), for the call to Ring Once and then be silent until answered, or for the call to be
ignored completely if Ignore Ring is selected.
Mute Reminder Volume
Controls the volume of the tone to remind you your microphone is muted, or turn the mute
tone off.
32