Filter
Top Products
NOTE If you don't have remote call control through a lifter (HL10) or cable (EHS), manually remove
desk phone handset before each call.
2
Dial a call using your desk phone.
3
To end the call, press the headset call button and hang up the handset.
Alternatively, you can place an outgoing call by pressing your headset call control button, then
dialing from your desk phone if the deskphone is the default line.
Place a mobile phone call
1
While wearing your headset, short press the base mobile button.
NOTE If you place the mobile phone call without pressing the base mobile button first, the audio will
stay on the mobile phone. If you would like to transfer the audio to your headset, short press the
mobile base button.
2
Dial a call from your mobile phone.
3
End the call by pressing the headset call control button.
Hands-free dialing
To enable hands-free dialing, install the Plantronics software. Once installed, go to Start >
Programs > Plantronics > Plantronics Hub > Settings > Wireless > Initiate Mobile voice
commands. For hands-free dialing, initiate the mobile call from the base by pressing the base
mobile button. Your mobile phone will prompt you for voice commands.
Alternatively, you can dial a number from your mobile phone and then press the base mobile
button to move the audio to the headset.
Place a Softphone Call
1
While wearing your headset, short press the base computer button.
2
Dial a call from your computer softphone.
3
End the call by pressing the headset call control button.
27