Filter
Top Products
1
Align the charging cradle pins with the base and press firmly until the cradle rests evenly on the
base.
2
Plug one end of power supply into power jack on back of the base and other end into working
power outlet.
3
Place the headset in the charge cradle. The headset charging LED flashes green when charging
the headset and turns solid green when the headset is fully charged.The headset and battery
charging LEDs flash green when charging the headset and battery. The charging LEDs turn solid
green, independently of each other, when the respective headset or battery is fully charged.
Charge for at least 20 minutes prior to the first use. A full charge takes 3 hours.
1
Headset charging LED
2
Spare battery charging LED
NOTE This product has a replaceable battery. Use only the battery type supplied by Plantronics.
The spare battery ships in the compartment on the side of the charge cradle. When the base is
powered the battery charges. While charging the charge LED flashes green and turns to solid
green once charged.
NOTE You can replace the headset battery with the spare battery even during active calls.
Charge Your Headset and Spare Battery
Charge Your Headset
Charge Spare Battery
13