Filter
Top Products
10 11
en
Settings
Ringer Tone Setting
You may choose from three tones or four melodies for your phone’s primary
ring tone.
Tones Melodies
Flicker Fur Elise (Elise)
Clatter We Wish You A Merry Christmas (Merry-Xmas)
Wake Up Beethoven’s Symphony #9 (Beethoven9)
Home Sweet Home (Hm Swt Hm)
To Change the Ring Tone
1 Press
.
2 Select the Handset Setup menu, and then the Ringer Tones submenu.
3 Move the cursor
or
to select a ring tone.
As each ring tone is highlighted, you will hear a sample (unless the dial pad
ringer volume is set to Off).
4 When you hear the tone you want to use,
press
to confirm.
Ringer Volume Setup
You can choose from three ringer volume settings (Off, Low and High).
With the phone in standby, press
or .
The display shows the current volume level
and the dial pad sounds the ringer at that level.
If ringer volume is set to Off, the bell icon will
appear on the screen next to the word Off while
in standby mode.
Use
to make the ringer volume louder or use
to make it softer or turn
it completely off. When you hear the ringer volume level you want to use, stop
pressing keys. The dial pad will use the new ringer volume starting with the next
incoming call.
NOTE For temporary ringer mute, see Muting the Ringer (Temporarily) on page 14.
Settings
Activating Auto Talk
Auto Talk allows you to answer the phone simply
by picking up the dial pad from the base. You do
not have to press a button to answer the call.
1 Press
.
2 Select the Handset Setup menu, and then the Auto Talk submenu.
3 Move the cursor
or
to select On or Off. Press
to confirm.
Activating Any Key Answer
Any Key Answer allows you to answer the phone
by pressing any key on the dial pad.
1 Press
.
2 Select the Handset Setup menu, and then the Any Key Answer
submenu.
3 Move the cursor to select On or Off. Press
to confirm.
Activating the Key Touch Tone
Key Touch Tone is the tone your keypad makes
when keys are pressed. You can turn this tone
on or off.
1 Press
.
2 Select the Handset Setup menu, and then the Key Touch Tone
submenu.
3 Move the cursor to select On or Off. Press
to confirm.