Filter
Top Products
Getting started
03
29
En
English Italiano Français
Nederlands
EspañolDeutsch
2 Press SYSTEM SETUP.
3 Use the
/
(cursor left/right)
buttons to choose ‘St. Memory?’ then
press ENTER.
4 Use the
/
(cursor up/down)
buttons to select the station preset you
want.
There are 30 preset locations; each can store
one station preset.
5 Press ENTER to save the station preset.
• If the system is unplugged from the power
supply completely, saved stations will
remain for several days, after which you’ll
have to save them again.
Listening to station presets
1 Make sure the TUNER function is
selected.
2 Use the ST +/– buttons to select a
station preset.
Listening to other sources
You can connect up to four external sources
(TV, satellite receiver, etc.) to this system,
including one digital source. See also
Connecting auxiliary components
on page 72.
1 If the system isn’t already on, press
STANDBY/ON to switch on.
Also make sure that the external source (TV,
satellite receiver, etc.) is switched on.
2 Select the source you want to listen to.
• Press
TV
to select the
TV
input, or use the
LINE
(
L1/L2
) button to select the
LINE 1
ANA, LINE1 DIG
or
LINE 2 ANA
input.
3 If necessary, start playback of the
external source.
STANDBY/ON
L1/L2CD FM/AM
OPEN CLOSEDISPLAY
DVD TUNER
TV LINE
NS03_ZFL.book 29 ページ ２００３年７月３１日 木曜日 午後７時０分