Filter
Top Products
Initial Settings menu
10
62
En
Chapter 10
Initial Settings menu
Using the Initial Settings
menu
The Initial Settings menu gives you complete
control in setting up your DVD system,
including video output settings and parental
lock settings, among others.
If an option is grayed out it means that it
cannot be changed at the current time. This is
usually because a disc is playing. Stop the
disc, then change the setting.
1 Press HOME MENU and select ‘Initial
Settings’ from the on-screen display.
2 Select the setup category from the list
on the left, then select an item from the
menu list to the right.
3 Make the setting you want.
• The language options shown in the on-
screen display illustrations on the
following pages may not correspond to
those available in your country or region.
Digital Audio Mode Settings
Make these settings if you connect an
external digital component to the optical
digital output. Note that DVD-Audio and
SACD audio is not output through this jack.
Dolby Digital Out
• Default setting:
Dolby Digital
If the connected component is Dolby Digital
compatible, set to
Dolby Digital
, otherwise
set to
Dolby Digital > PCM
. Check the
manual that came with the other component
if you’re unsure whether it is Dolby Digital
compatible.
DTS Out
• Default setting:
DTS
If the connected component has a built-in
DTS decoder, set this to
DTS
, otherwise set to
DTS > PCM
. Check the manual that came
with the other component if you’re unsure
whether it is DTS compatible.
Play Mode
Disc Navigator
Initial Settings
Video Adjust
HOME MENU
DVD
Digital Audio Mode
Video Output
Language
Display
Options
Dolby Digital Out
DTS Out
Linear PCM Out
Dolby Digital
Dolby Digital > PCM
Initial Settings
Digital Audio Mode
Video Output
Language
Display
Options
Dolby Digital Out
DTS Out
Linear PCM Out
DTS
DTS > PCM
Initial Settings
NS03_ZFL.book 62 ページ ２００３年７月３１日 木曜日 午後７時０分