Filter
Top Products
Getting started04
18
En
5 Use the VOLUME +/– to adjust the
volume to an appropriate level.
1
6Use / to adjust the channel levels in
turn.
You should hear the test tone at the same
volume from each speaker when seated in the
main listening position. The channel level
range is ±10 dB.
7 When you’re done, press ENTER to exit
test tone setup.
Using the on-screen displays
For ease of use, this system makes extensive
use of graphical on-screen displays (OSDs).
All the screens are navigated in basically the
same way, using , , , to change the
highlighted item and pressing ENTER to select
it.
2
Important
• Throughout this manual, ‘Select’ means
use the cursor buttons to highlight an item
on-screen, then press ENTER.
Tip
• The button guide at the bottom of every
OSD screen shows you which buttons
you’ll need to use for that screen.
Playing discs
The basic playback controls for playing DVD,
CD, Video CD/Super VCD, DivX video/WMV
and WMA/MP3/MPEG-4 AAC discs are
covered here.
Further functions are detailed in
chapter 6.
Important
• Throughout this manual, the term ‘DVD’
means DVD-Video, DVD-R and DVD-RW.
1 If the player isn’t already on, switch it on.
If you’re playing a disc with video, also turn on
your TV and make sure that it is set to the
correct video input.
2 Press
OPEN/CLOSE
to load a disc.
Load a disc with the label side facing up, using
the disc tray guide to align the disc (if you’re
loading a double-sided DVD disc, load it with
the side you want to play face down).
3 Press
(play) to start playback.
If you’re playing a DVD or Video CD/Super VCD,
a menu may appear. See DVD-Video disc
menus and Video CD/Super VCD PBC menus on
page 19 to navigate these.
If you loaded a disc containing JPEGs, a
slideshow will start. See Playing a JPEG
slideshow on page 25 for more on this.
• If a disc contains a mixture of DivX video/
WMV and other media file types (MP3, for
example), first select whether to play the
DivX video/WMV files (DivX/WMV) or the
other media file types (MP3/WMA/JPEG/
MPEG-4 AAC) from the on-screen display.
Note
1 When the volume is set to 51 or more, TESTTONE cannot be selected and the channel level setting range is restricted. In ad-
dition, if the channel level range of any speaker is set to the + side, the maximum volume is also restricted.
2 The screen saver will appear after five minutes of inactivity.
Button What it does
HOME
MENU
Displays/exits the on-screen display.
Changes the highlighted menu
item.
ENTER
Selects the highlighted menu item.
RETURN
Returns to the main menu without
saving changes.
HTZ180_181_280_282DVD_En.book 18 ページ ２００９年３月１３日 金曜日 午後２時５０分