Open as PDF
Getting started 04
After pressing ENTER, the preset class and
number stop blinking and the system
Listening to station presets
You will need to have some presets stored to do
1 Make sure the
to select the class in which
the channel is stored. Press repeatedly to
cycle through classes A, B and C.
buttons to select a station
• You can also use the number buttons to do
Listening to other sources
You can connect auxiliary sources (TV, satellite
receiver, etc.) to this unit for playback through
the speaker system. See Connecting auxiliary
audio components on page 40 for more on this.
• To connect a USB device to the USB
terminal, see USB playback and Recording
on page 31.
• HTZ280/282DVD-AP only: Bluetooth
ADAPTER is selectable when it is plugged
and detected. See Bluetooth
Wireless Enjoyment of Music on page 42 for
1 Make sure that the external source (TV,
satellite receiver, etc.) is switched on.
to select the source.
3 If necessary, start playback of the source.
Setting the sleep timer
The sleep timer switches off the system after
about an hour so you can fall asleep without
worrying about it.
• Press SHIFT+
repeatedly to select an
option then press
Choose between the following options:
• SLP ON – Switches off after about an hour.
The indicator lights.
• SLP OFF – Cancels the sleep timer.
After selecting SLP ON, you can press
SHIFT+SLEEP again to check how much time
is left. Each line indicates approximately 12
1 The display dims when the sleep timer is set.
SLP --- --
HTZ180_181_280_282DVD_En.book 21 ページ ２００９年３月１３日 金曜日 午後２時５０分