Pioneer XR-VS100D Stereo Amplifier User Manual


 
8 Using the Tuner
44
En
You can store up to 24 station presets (memories) so that you always have easy access
to your favourite stations without having to tune in manually each time.
If the unit is unplugged from the power supply completely, memorized stations will
remain for several days, after which you’ll have to memorize them again.
Note: The following instructions assume that you are already familiar with tuning
into radio stations—see the previous page for detailed tuning instructions.
1 Tune into a radio station on either the AM or
FM band.
See the previous page for detailed instructions on how to do this.
2 Press 7 (STOP/ST.MEMORY).
The frequency display starts blinking.
3 Choose a station memory in which to store the
station's frequency.
There are 24 memory locations; each can store one station. Use the
4·1
and
¡·¢
buttons to step through the locations available.
4 Press 7 (STOP/ST.MEMORY) again to
memorize the station.
Memorizing Stations for Quick Recall
Listening to memorized stations
1 Press BAND to switch to tuner mode.
If you’re using the front panel controls, press TUNER/BAND.
2 Press FREQ/STATION (front panel only).
This switches the tuner to the preset station mode.
3 Use the number buttons or 4 and ¢ to
select a previously memorized station.
For example, to select preset 6, press 6; to select 24, press >10, 2, 4.
On the front panel, use the
4·1
and
¡·¢
buttons to switch between
the station presets.
TUNER/BAND
7
(STOP/ST.MEMORY)
4
·
1
¡
·
¢
TUNER/BAND
FREQ/STATION
4
·
1
¡
·
¢