Filter
Top Products
Expert System Settings
88
En
To start the process use DATA COPY to paste the ALL CH
ADJUST or FRONT ALIGN settings into CUSTOM 1 or CUS-
TOM 2.
Follow steps 1-5 on page 83, if necessary, to get to the
starting point mentioned here.
1 ACOUSTIC CAL EQ should be selected,
if it isn’t use the buttons to select
and press ENTER.
2 Use the buttons to select DATA
COPY. Press ENTER.
3 Use the buttons to select CUS-
TOM 1 or CUSTOM 2 as the destina-
tion you want to copy the data to.
Press ENTER.
4 Use the buttons to select ALL CH
ADJUST or FRONT ALIGN as the type
of curve you want to copy. Press
ENTER.
When you press ENTER the data is copied to the
destination you chose.
After you have done this process once you can also copy
data in CUSTOM 1 or CUSTOM 2.
5 When done select EXIT (if it’s not
already selected) and press ENTER.
You can now adjust the settings in CUSTOM 1 or
CUSTOM 2.
1
2
1-5
3
4
00_VSX-AX3.book Page 88 Monday, May 19, 2003 1:05 PM