Filter
Top Products
Controls and displays
04
36
En
6
/
/
/
/ENTER buttons
Use to navigate menus and select options/execute
commands.
7 AUDIO
Use to switch the audio tracks of a DVD when a DVD
player is selected as the input source.
8 Command buttons for other components
Use these buttons to control the component you selected
with the
MULTI CONTROL
buttons. The are available
once you’ve programmed the remote to control the
appropriate component (for example, your TV or DVD
player). See
Controlling other equipment
on page 54 for
more on this.
9 TV CONTROL buttons
These are dedicated buttons used to control your TV once
you’ve programmed your TV preset code (see
Controlling
other equipment
on page 54 for more on this).
TV INPUT
Press to select the input source for the TV.
TV CH +/-
Use these buttons to change the channel of the TV.
TV VOL +/-
Press to control the volume of the TV.
10 Listening mode buttons
(page 37)
MOVIE / MUSIC
Press to select the surround listening mode you want
(see
Listening in surround sound
on page 37).
After selecting a
MOVIE
or
MUSIC
listening mode
above, use these to select the options available.
ENTER
Use to confirm your selection.
STEREO/DIRECT
(page 40)
Switches the receiver into
STEREO
mode if it was in
a different listening mode or toggles between
DIRECT
and
STEREO
.
11 SB CH MODE
(page 43)
Use to select the surround/virtual back channel mode.
12 SYSTEM OFF
(page 59)
Press to switch off all Pioneer components in your
system, or any other component you have also
programmed to switch off using the System Off function.
13
RECEIVER (STANDBY/ON)
Press to switch the receiver on or into standby.
14 MULTI OPERATION
(page 59)
Use this button to perform multi operations.
15 RECEIVER
Press this button to access receiver functions or when
setting up the receiver.
16 TOP MENU/GUIDE
Use to display the disc ‘top menu’ when a DVD player is
selected as the input source. Also use to find stations or
menus on a digital TV tuner.
17 RETURN
When you are setting up the receiver, this button will take
you back one step. When another component is selected
(such as a DVD player, cable tuner, satellite tuner or
digital TV tuner), use it the same way as the components
‘Return’ button (it may also exit from the menu screen,
depending on the maker of the unit).
18 INPUT
Press to select an input source. The button will cycle
through all the possible input sources (such as
DVD/LD
,
USB
and
PHONO
).
19 VOLUME (+/-)
Use to increase or decrease the volume of the receiver.
20 MIDNIGHT
(page 45)
Press to switch on/off Midnight listening.
21 MUTE
Press to mute or restore the volume.
22 MULTI CH INPUT
(page 41)
Press to select the component connected to the
MULTI
CH IN
terminals (for example, a DVD-Audio player).
23 ACOUSTIC EQ
(page 41)
Press to select an acoustic calibration EQ setting.
24 REMOTE SETUP
Use to customize remote control functions and the
remote control display (see
Controlling other equipment
on page 54 for more on this).
VSX-9300.book 36 ページ ２００４年５月２１日 金曜日 午前１１時２８分