Filter
Top Products
31
En
Operation
Displays & Controls
0 7 button (MPX)
Use to stop other components. Also use to
switch between auto stereo and mono reception
of FM broadcasts. If the signal is weak then
switching to MONO will improve the sound
quality.
- 2 button
Use to put receiver in Dolby Digital, Dolby
Surround and DTS modes. To use first press the
RCV button then operate this button.
= DSP button
Use to put receiver in one of the DSP modes. To
use first press the RCV button then operate this
button.
~ CH SELECT
Use to select a speaker when setting up the
surround sound of the receiver. To use, first press
the RCV button, then operate this button.
! LOUDNESS button
Use to switch on the loudness. This feature is
useful for getting good bass and treble sounds
listening at low volumes.
@ FUNCTION button
Use to select the playback or recording source.
This button lets you cycle through the different
functions of the receiver in the following order:
CD, tuner (FM/AM), AUX, CD-R/TAPE/MD, VCR/
DVR, DVD/LD, VIDEO and TV/SAT.
# CH LEVEL +/– buttons
Use to adjust the output level of the selected
channel(s).
$ LED display
This display flashes when a command is sent
from the remote control to the receiver. It also
flashes at other times, for example, when
teaching the receiver preset codes.
% RECEIVER button
This switches the receiver between STANDBY
mode and power ON.
^ DISC button
Only used when controlling other components.
& MASTER VOLUME +/– buttons
Use to set the overall listening volume.
* ¶ button
Use to record with other components.
( ¡ button (CLASS)
Use to fast forward search on CDs etc.
Also use the CLASS feature to switch between
the three banks (classes) of station memories.
) ¢ button (RF ATT)
Use to skip forward tracks on CD players etc.
Also use to lower the input level of a radio signal.
_ 4 button (DISPLAY)
Use to skip backward tracks on CD players etc.
Also use to display the RDS information.
+ TEST TONE
Use to sound the TEST TONE when setting up
the surround sound of the receiver. To use, first
press the RCV button, then operate this button.
¡ FL DIMMER button
Use to make the fluorescent display (FL) dimmer
or brighter. There are three brightness settings
as well as an off setting.
™ SETUP button (see p.22, 24)
Use this button when setting up the remote
control to control other components.
£ MUTING button
Use to mute the sound or restore the sound if it
has been muted.
¢ MENU button
Use to access different menus associated with
your DVD player.
∞ CHANNEL +/– buttons
Use to change channels on your TV.