Filter
Top Products
18
En
Preparations
Low cut filter ON/OFF setting mode
Turn the low cut filter ON when distorted sound is output through the sub woofer.
• Initial setting is “OFF”.
• If the SUB WOOFER is set to “OFF” in the SUB WOOFER ON/OFF setting mode, the low
cut filter cannot be set.
Press % or fi to select low cut filter ON or OFF.
CENTER speaker distance setting mode
Normally, the front and center speakers are placed at different distances from the listening position. This means
that the sound from these speakers will not coincide. To compensate for this, set the center speaker distance
setting.
• Adjust the speaker distance in 0.3 m increments from 0.3 m to 9.0 m.
• Initial setting is 3.0 m.
• When “C
∗
” is selected in Speakers setting mode, the center distance cannot be set.
Press % or fi to set the distance of the CENTER
speaker from the main listening position (up to
30 steps).
SURROUND speakers distance setting mode
Adding the proper delay to the surround speakers is necessary to achieve a surround effect. The surround
speakers are placed at various distances from the listening position. So to compensate for this, set the surround
speakers distance setting.
• Adjust the speaker distance in 0.3 m increments from 0.3 m to 9.0 m.
• Initial setting is 3.0 m.
• When “S
∗
” is selected in Speakers setting mode, the surround distance cannot be set.
Press % or fi to set the distance of the
SURROUND speakers from the main listening
position (up to 30 steps).
FRONT speakers distance setting mode
Sets the distance from the front speakers to the listening position.
• Adjust the speaker distance in 0.3 m increments from 0.3 m to 9.0 m.
• Initial setting is 3.0 m.
Press % or fi to set the distance of the FRONT
speakers from the main listening position (up
to 30 steps).
dB
dB
dB
dB