Pioneer S-VS100V Stereo Amplifier User Manual


 
11 Using the Timer
54
En
6 Set the record start time.
Use the S.M.JOG to set the hour, then press SET.
Set the minute in the same way, pressing
SET when you’re done.
7 Set the record end time.
Use the S.M.JOG to set the hour, then press SET.
Set the minute in the same way, pressing
SET when you’re done.
The switch-on and switch-off times are confirmed in the display after pressing
SET this last time.
8 Switch the system into standby mode.
9 Press TIMER/CLOCK ADJ.
10 Turn the S.M.JOG dial until the display shows
REC, then press SET.
The record timer indicator lights in the display and record timer setup is
complete!
Note
There is no way to edit the
timer settings once made.
If you make a mistake, work
through the rest of the
settings, then start over.
Here’s how to cancel the wake-up or record timer (whichever has been set):
While in standby mode, press TIMER/CLOCK
ADJ.
Turn the S.M.JOG until the display shows OFF, then press SET.
Canceling the Timer
TIMER/CLOCK ADJ
S.M.JOG
SET