Pioneer VSX-C100 Stereo System User Manual


 
56
En
Amplifier Section
Continuous average power output of 21 watts*
per channel, min., at 6 ohms, from 20 Hz to
20,000 Hz with no more than 0.9 %** total
harmonic distortion (front).
Continuous Power Output (SURROUND MODE)
FRONT ................... 33 W / ch (1 kHz, THD 1 %, 6 )
CENTER ........................ 33 W (1 kHz, THD 1 %, 6 )
SURROUND ........... 33 W / ch (1 kHz, THD 1 %, 6 )
RMS Power Output (SURROUND MODE)
FRONT ................. 41 W / ch (1 kHz, THD 10 %, 6 )
CENTER ..................... 41 W (1 kHz, THD 10 %, 6 )
SURROUND ......... 41 W / ch (1 kHz, THD 10 %, 6 )
Input (Sensitivity/Impedance)
DVD, TV/SAT, DVR/VCR, FRONT ....... 200 mV/47 k
Frequency Response
DVD, TV/SAT, DVR/VCR, FRONT
.........................................5 Hz to 100,000 Hz dB
Output (Level/Impedance)
DVR/VCR OUT ................................... 200 mV/2.2 k
Signal-to-Noise Ratio (IHF, short circuited, A network)
DVD, TV/SAT, DVR/VCR, FRONT ................... 97 dB
Signal-to Noise Ratio [EIA, at 1 W (1 kHz)]
DVD, TV/SAT, DVR/VCR, FRONT ................... 79 dB
VIDEO Section
Input (Sensitivity/Impedance)
DVD, TV/SAT, DVR/VCR, FRONT ........... 1 Vp-p/75
Output (Level/Impedance)
DVR/VCR, MONITOR ............................. 1 Vp-p/75
Frequency Response
DVD, TV/SAT, DVR/VCR, FRONT MONITOR
................................................ 5 Hz to 7 MHz
dB
Signal-to-Noise Ratio ..........................................55 dB
Specifications (U.S. model)
+0
–3
+0
–3
FM Tuner Section
Frequency Range ......................87.5 MHz to 108 MHz
Usable Sensitivity ... Mono:13.2 dBf, IHF (1.3 µV/ 75 )
50 dB Quieting Sensitivity ...................Mono: 20.2 dBf
....................................................... Stereo: 38.6 dBf
Signal-to-Noise Ratio ............. Mono: 73 dB (at 85 dBf)
..........................................Stereo: 70 dB (at 85 dBf)
Distortion .................................. Stereo: 0.5 % (1 kHz)
Alternate Channel Selectivity .............60 dB (400 kHz)
Stereo Separation ...................................40 dB (1 kHz)
Frequency Response .............. 30 Hz to 15 kHz (±1dB)
Antenna Input (DIN) ........................ 75 unbalanced
AM Tuner Section
Frequency Range ....... 530 kHz to 1,700 kHz (10 kHz)
Sensitivity (IHF, Loop antenna) .................... 350 µV/m
Selectivity ...........................................................25 dB
Signal-to-Noise Ratio ..........................................50 dB
Antenna ..................................................Loop antenna
Miscellaneous
Power Requirements .......................... AC 120 V, 60 Hz
Power Consumption ......................................... 120 W
In Standby ......................................................... 0.8 W
Dimensions................ 420 (W) x 65 (H) x 319(D) mm
.............. 16 9/16 (W) x 2 9/16 (H) x 12 9/16(D) in.
Weight (without package) ............. 4.8 kg (10 lb 10 oz)
Furnished Parts
AM loop antenna ....................................................... 1
FM wire antenna ........................................................1
Dry cell batteries (AA size IEC R6P) ...........................2
Remote control unit ................................................... 1
Power cord ................................................................1
Speaker cord labels .................................................... 1
Cord with plug .......................................................... 1
Warranty card ............................................................ 1
Operating instructions ............................................... 1
Specifications and the design are subject to possible
modifications without notice, due to improvements.
* Measured pursuant to the Federal Trade
Commissions Trade Regulation rule on Power Output
Claims for Amplifiers.
** Measured by Audio Spectrum Analyzer.
Techno Know How