Filter
Top Products
27
Additional Features
Additional Playback Features
RANDOM
FINALIZE
ERASE
TIME
FADER
REPEAT
CHECKPROGRAM CLEAR
DIGITAL
SYNCHRO
INPUT
SELECTOR
SKIP
PLAY
SET
SKIP ID
CLEAR
AUTO/
MANUAL
TRACK NO.
WRITE
REC
1234
5678
9
10/0
>
10
783
1¡4¢
Î
COMPACT DISC RECORDER
REMOTE CONTROL UNIT
RANDOM
FINALIZE
ERASE
TIME
FADER
REPEAT
CHECKPROGRAM CLEAR
DIGITAL
SYNCHRO
INPUT
SELECTOR
SKIP
PLAY
SET
SKIP ID
CLEAR
AUTO/
MANUAL
TRACK NO.
WRITE
REC
1234
5678
9
10/0
>
10
783
1¡4¢
Î
COMPACT DISC RECORDER
REMOTE CONTROL UNIT
Fading In and Fading Out
Pausing a disc during playback cuts the sound off abruptly. You can achieve a softer effect by using the fader feature to fade
the track out over a few seconds before pausing. Likewise, when you resume playback, instead of a sudden burst of sound,
you can have the player fade in the volume gradually. Note that the fader is available only from the remote control, and that
you can only hear the fades through the analog outputs, so if your player is connected to the amplifier via a digital out, you
won't hear the fades.
Press FADER during playback to pause the disc.
The fader indicator in the display blinks and the volume fades to zero
over about five seconds. The player then pauses playback.
Press FADER to resume playback of a paused disc.
The fader indicator in the display blinks and the volume starts to fade in.
Playing Tracks at Random
Selecting the random play mode leaves the track order of the disc up to the player. Each track on the disc is played just
once, but in a random order. This feature is only available from the remote control.
Press RANDOM during playback or when the disc
is stopped.
The RDM indicator lights in the display and random playback starts.
❖ Pressing 7 (stop) cancels the random play mode.
❖ You can still use repeat mode during random play.
FADER
RANDOM
ERASE
TIME
REPEAT
DIGITAL
SYNCHRO
INPUT
SELECTOR
SKIP
PLAY
SET
SKIP ID
CLEAR
AUTO/
MANUAL
TRACK NO.
WRITE
1234
5678
9
10/0
>
10
783
1¡4¢
Playing a Disc with Skip IDs
If you're not sure whether a disc has skip
ID
s programmed, look for the SKIP ON indicator in the display when you load a
disc—it will light automatically if one or more are present.
1
Load a disc.
The SKIP ON indicator lights if there are any skip
ID
s on the disc, and the
player is in skip play mode (in other words, it won't play those tracks that
are marked by skip
ID
s).
2
Press SKIP PLAY to switch skip play on/off, then
press 3 (play).
When you turn off skip play mode the player ignores the skip
ID
s and
plays all tracks on the disc.
❖ If there were no skip
ID
s on the disc in the first place, the SKIP PLAY
button has no effect.
2
The SKIP ON indicator
lights if there are skip
ID
s present on the disc.