Pioneer MEP-7000 Home Theater System User Manual


 
START PLAYBACK (Using normal connections)
31
En
English
USING THE PLAYLIST
This unit allows the user to prerecord desired tracks in a playlist,
thus allowing quick track selection even when using large-
capacity discs and USB storage devices.
Up to 20 playlists can be constructed, and each playlist can record
up to 150 tracks from multiple USB storage devices and CD-ROM/
DVD-ROM discs.
Playlist display composition
Playlist listing
When the [PLAYLIST] function button is pressed, a listing of
playlists is displayed. By using the rotary selector dial, a desired
playlist can be selected. The playlist indicated by an orange icon
has been selected for mixing (P. 41).
Also, if a playlist is selected and the rotary selector dial is held
depressed for one second or more, the playlist menu will appear in
the right window.
When a Playlist is Open
Tracks recorded in a playlist are given consecutive numbers and
displayed with title and artist names. When no title is present, the
file name is displayed.
When a track’s original storage device (USB memory, CD-ROM/
DVD-ROM, etc.) is not currently connected, that track’s name is
grayed out on the display.
Also, if a track is selected and the rotary selector dial is pressed,
the track menu will appear in the right window.
To record tracks in a playlist
1 Use the cursor to select tracks or folders in a USB storage
device or CD-ROM/DVD-ROM disc.
2 Hold the rotary selector dial depressed for one second or
more.
The cursor will flash, and the track will be recorded in the
currently open playlist.
The maximum number of tracks recordable in a single
playlist is 150.
When entire folders are recorded additional time may be
required.
•The [PLAYLIST] icon will flash during recording of tracks to
the playlist. A playlist cannot be opened when the tab is
flashing.
Play a track from the playlist
1 Open playlist.
2 Use the rotary selector dial to select a track, then press the
LOAD A or LOAD B button.
Tracks will playback in consecutive numerical order.
New tracks can be registered and edited on the playlist even
while another track is playing from the list.
MEMO
Music CD (CD-DA) tracks and DJ software tracks (including
DJS) cannot be recorded on a playlist.
Once recorded, a playlist remains in memory even when the
power is turned off, so that it can be reused later.
When a track is recorded on a playlist from a USB storage
device, the playlist information is written to the storage device
itself.
1Playlist name
2 Consecutive number
3Title
4 Artist name
NOTE
If the connected USB storage device does not have
sufficient open space, it may be impossible to record the
contents of tracks on the device.
2
1 3 4
MEP-7000_7L_EN.book 31 ページ 2008年3月5日 水曜日 午後6時4分