Filter
Top Products
Cassette Player
En
21
Introduction of advanced
cassette player operation
1 FUNCTION display
Shows the function status.
Press FUNCTION to display the function
names.
Press FUNCTION repeatedly to switch between
the following functions:
RPT (repeat play)—B.S (blank skip)—R.INT
(radio intercept)—B NR (Dolby B NR)
• To return to the playback display, press
BAND/ESC.
Note
• If you do not operate the function within about
30 seconds, the display is automatically
returned to the playback display.
Repeating play
Repeat play lets you hear the same track over
again.
1 Press FUNCTION to select RPT.
Press FUNCTION until Repeat appears in the
display.
2 Press 5 to turn repeat play on.
Repeat :ON appears in the display. The track
presently playing will play and then repeat.
3 Press ∞ to turn repeat play off.
Repeat :OFF appears in the display. The track
presently playing will continue to play and then
play the next track.
Skipping blank tape sections
Blank skip automatically fast forwards to the
next song if there is a long period of silence (12
seconds or longer) between songs.
1 Press FUNCTION to select B.S.
Press FUNCTION until Blank Skip appears in
the display.
2 Press 5 to turn blank skip on.
Blank Skip :ON appears in the display. Long
periods of silence between songs will be
skipped.
3 Press ∞ to turn blank skip off.
Blank Skip :OFF appears in the display. The
complete cassette tape will play.
Radio intercept
This function allows you to listen to the radio
during tape fast-forwarding/rewinding.
1 Press FUNCTION to select R.INT.
Press FUNCTION until Radio Int. appears in the
display.
2 Press 5 to turn radio intercept on.
Radio Int. :ON appears in the display.
3 Press ∞ to turn radio intercept off.
Radio Int. :OFF appears in the display.
1
English
Español
Deutsch
Français
Italiano
Nederlands
05
Section