Filter
Top Products
Cassette Player
Playing a tape
These are the basic steps necessary to play a
tape with your cassette player. More advanced
cassette player operation is explained starting
on page 21.
1 PLAY TIME indicator
Shows the elapsed playing time of the cur-
rent side of the tape.
2 TAPE DIRECTION indicator
Shows the direction of the tape transport.
1 Press
OPEN to open the front panel.
Cassette loading slot appears.
• After inserting a cassette tape, press SOURCE
to select the cassette player.
2 IInsert a cassette tape into the cassette
loading slot.
Playback will automatically start.
Cassette loading slot
EJECT button
• You can eject a cassette tape by pressing
EJECT.
• When a metal or chrome tape is inserted
Metal is lit on the display. Nothing is displayed
for a normal tape.
3 After a cassette tape has been inserted,
close the front panel.
4 Use
VOLUME to adjust the sound level.
Rotate to increase or decrease the volume.
5 To perform fast forward or rewind, press 2
or 3.
FF or REW appears in the display.
• To cancel fast forward or rewind and return to
playback, press BAND/ESC.
• You can cancel fast forward or rewind by
pressing 2 or 3 in the same direction twice.
6 To perform forward or rewind music
search, press 2 or 3 twice.
F-MS (forward music search) or R-MS (rewind
music search) appears in the display. The cas-
sette player will fast forward or rewind to the
next or previous blank spot on the tape and
begin to play.
• To cancel music search and return to play-
back, press BAND/ESC.
• You can cancel music search by pressing 2
or 3 in the same direction again.
7 To change the direction of the tape trans-
port, press
BAND/ESC.
Notes
• Do not insert anything other than a cassette
tape into the cassette loading slot.
•
PLAY TIME indicator starts from 00min00sec
in the following cases:
— When a tape is inserted
— When the tape direction is changed
— When you rewind the tape to the beginning
• PLAY TIME indicator is halted when fast for-
ward, rewind or music search is operating.
2
1
En
20
05
Section