Pioneer HTZ280DVD-AP Home Theater System User Manual


 
Disc playback features06
28
En
Tip
To add files without the on-screen display,
simply press PLAYLIST
1
,
2
or
3
during
normal playback of the file you want
(except when a JPEG slideshow is playing
at the same time as audio).
Listening to playlists
With playback stopped, p
ress
PLAYLIST
1, 2 or 3.
During playback, PGM lights in the front panel
display. If no playlist has been programmed,
NO LIST shows in the display.
If the playlist contains both JPEG and audio
files, playback of the slideshow and audio
files starts.
Clearing files from a playlist
1 Start playback of your playlist.
2 From the ‘Disc Navigator’ screen,
highlight the file you want to remove
from the playlist and press
CLEAR
.
Looping a section of a disc
The A-B Repeat function allows you to specify
two points (A and B) within a track (CD, Video
CD/Super VCD) or title (DVD) that form a loop
which is played over and over.
1 During playback, press
HOME MENU
and
select ‘
Play Mode
’.
2 Select ‘A-B Repeat’.
3Press
ENTER
on ‘A(Start Point)’ to set the
loop start point.
4 Press
ENTER
on ‘B(End Point)’ to set the
loop end point.
After pressing ENTER, playback jumps back to
the start point and plays the loop.
5 To resume normal playback, select ‘Off’.
Using repeat play
In addition to various repeat play options, it’s
also possible to use repeat play together with
program play (see Creating a program list on
page 29).
1 During playback, press
HOME MENU
and
select ‘
Play Mode
’.
2 Select ‘Repeat’ then select a repeat play
option.
1
If program play is active, select Program
Repeat to repeat the program list, or Repeat
Off to cancel.
For DVD discs, select Title Repeat or
Chapter Repeat.
For CDs and Video CD/Super VCDs, select
Disc Repeat or Track Repeat.
For DivX video/WMV discs, select Title
Repeat (or Repeat Off).
Using random play
Use this function to play titles or chapters
(DVD-Video) or tracks (CD and Video CD/Super
VCD) in a random order.
2
1 During playback, press
HOME MENU
and
select ‘
Play Mode
’.
2 Select ‘Random’ then select an option.
For DVD discs, select Random Title or
Random Chapter.
For CDs and Video CD/Super VCDs, select
On or Off to switch random play on or off.
Play Mode
Note
1 You can’t use repeat play with WMA/MP3/MPEG-4 AAC discs.
2 • You can set the random play option when a disc is playing or stopped. However, you can’t use random play together with
program play.
• You can’t use random play with VR format DVD-R/-RW discs, WMA/MP3/MPEG-4 AAC discs, DivX video/WMV discs, or while
a DVD disc menu is being displayed.
HTZ180_181_280_282DVD_En.book 28 ページ 2009年3月13日 金曜日 午後2時50分