Filter
Top Products
Getting started 04
21
En
English
FrançaisDeutsch
Nederlands
Italiano Español
4 Press
ENTER
.
After pressing ENTER, the preset class and
number stop blinking and the system
memorize station.
Listening to station presets
You will need to have some presets stored to do
this.
1 Make sure the
TUNER
function is
selected.
2 Press
CLASS
to select the class in which
the channel is stored. Press repeatedly to
cycle through classes A, B and C.
3Use the
PRESET
buttons to select a station
preset.
• You can also use the number buttons to do
this.
Listening to other sources
You can connect auxiliary sources (TV, satellite
receiver, etc.) to this unit for playback through
the speaker system. See Connecting auxiliary
audio components on page 40 for more on this.
• To connect a USB device to the USB
terminal, see USB playback and Recording
on page 31.
• HTZ280/282DVD-AP only: Bluetooth
ADAPTER is selectable when it is plugged
and detected. See Bluetooth
®
ADAPTER for
Wireless Enjoyment of Music on page 42 for
more on this.
1 Make sure that the external source (TV,
satellite receiver, etc.) is switched on.
2 Press
LINE
to select the source.
3 If necessary, start playback of the source.
Setting the sleep timer
The sleep timer switches off the system after
about an hour so you can fall asleep without
worrying about it.
1
• Press SHIFT+
SLEEP
repeatedly to select an
option then press
ENTER
.
Choose between the following options:
• SLP ON – Switches off after about an hour.
The indicator lights.
• SLP OFF – Cancels the sleep timer.
After selecting SLP ON, you can press
SHIFT+SLEEP again to check how much time
is left. Each line indicates approximately 12
minutes (remaining):
Note
1 The display dims when the sleep timer is set.
SLP --- --
HTZ180_181_280_282DVD_En.book 21 ページ ２００９年３月１３日 金曜日 午後２時５０分