Filter
Top Products
Surround sound and other settings09
60
En
•
Vol C.On
– When this unit is switched to
an input that used the plasma display
(DVD, for example), the volume on the
plasma display is muted so only sound
from this unit is heard.
Function setting for DVD input
•
DVD -> OFF
/
PDP1–5
/
PDPTV
– Matches
the
DVD
function of this unit with a
numbered video input on the plasma
display. For example,
DVD -> PDP2
matches the
DVD
input with video input 2
on the plasma display.
Function setting for TV input
•
TV -> OFF
/
PDP1–5
/
PDPTV
– Matches the
TV
function of this unit with a numbered
video input on the plasma display. For
example,
TV -> PDP1
matches the
TV
input with video input 1 on the plasma
display.
Function setting for L1 input
•
LINE1 -> OFF
/
PDP1–5
/
PDPTV
– Matches
the
LINE
(
L1
) function of this unit with a
numbered video input on the plasma
display. For example,
LINE1 -> PDP3
matches the
LINE1
input with video input 3
on the plasma display.
Function setting for L2 input
•
LINE2 -> OFF
/
PDP1–5
/
PDPTV
– Matches
the
LINE
(
L2
) function of this unit with a
numbered video input on the plasma
display. For example,
LINE2 -> PDP3
matches the
LINE2
input with video input 3
on the plasma display.
Setting the channel levels
You can set the relative channel levels from
your main listening position for all of the
listening modes independently (except
STEREO
).
If you used the Room Setup feature (page 27),
the channel levels for each listening mode will
already be set. However, you can still fine-tune
the levels here if you need to.
1 Select a listening mode.
Press
SURROUND
,
ADVANCED
or
FRONT
SURROUND
repeatedly to select the listening
mode you want.
2 Press TEST TONE (SHIFT + 4) to hear the
test tone.
The test tone is output in the following order
(from the speakers active in the current
listening mode):
•
L
– Front left speaker
•
C
– Center speaker
•
R
– Front right speaker
•
RS
– Right surround speaker
SHIFT
VOLUME
ENTER
SURROUND ADVANCED
TEST TONE CH LEVEL
XV-DV88.book 60 ページ ２００６年１１月９日 木曜日 午後２時２８分