Pioneer HTD88DVD CD Player User Manual


 
Connecting up
02
13
En
The front, center and surround speakers
supplied with this system are magnetically
shielded. However, placing them extremely
close to a television may result in color
distortion on the screen. If this happens,
move the speakers a little further away and
switch off the television for 15 to 30
minutes.
The subwoofer is not magnetically shielded
and so should not be placed near a TV or
monitor.
Wall-mounting the center and
surround speaker system
(The HTD88DVD model supports wall mounting
of the surround speakers only)
Before mounting
Remember that the speaker system is
heavy and that its weight could cause the
wood screws to work loose, or the wall
material to fail to support it, resulting in the
speaker falling. Make sure that the wall you
intend to mount the speakers on is strong
enough to support them. Do not mount on
plywood or soft surface walls.
Mounting screws are not supplied. Use
screws that are suitable for the wall
material and that will support the weight of
the speaker.
If you are unsure of the qualities and
strength of the walls, consult a
professional for advice.
Pioneer is not responsible for any
accidents or damage that result from
improper installation.
Connecting to your TV
This system has three different kinds of video
output that you can use to connect up your TV.
Check the available inputs on your TV to see
which you can use.
Do not connect a VCR between this system
and your TV as DVD playback will be
affected.
Use the supplied video cable to connect
the VIDEO OUT jack to a video input on
your TV.
Wood screw
Protrusion: 5 mm to 7 mm
HTD8DVD
HTD88DVD
5 mm
5 mm
10 mm
5 mm
10 mm
VIDEO
CONTROL
PR
PB Y
COMPONENT
VIDEO OUT
CENTER
SUB
WOOFER
LR
FRONT
S-VIDEO
OUT
IN
VIDEO
OUT
SPEAKERS
TV
VIDEO
INPUT
XV-DV88.book 13 ページ 2006年11月9日 木曜日 午後2時28分