Filter
Top Products
28
ENGLISH ESPAÑOL DEUTSCH FRANÇAIS
ITALIANO NEDERLANDS
ITS (Instant Track Selection)
The ITS function allows you to search for the track you wish to play when a Multi-CD
player is installed. You can use ITS to program automatic playback of up to 24 tracks per
disc from up to 100 discs. (You can store ITS program and Disc Title data for up to 100
discs in memory. With a 50-Disc type Multi-CD Player, you can also store Music Group
data.)
ITS Programming (ITS)
Programmed tracks are played within the selected repeat play range in the “Repeat Play”
on page 26.
1. Play the track you wish to program.
2. Select the ITS Programming mode (ITS) in the Detailed Setting Menu.
(Refer to page 19.)
Note:
• After 100 discs have been programmed, data for a new disc will overwrite the data for the disc that
has not been played back for the longest time.
ITS Play (ITS.PLAY)
ITS Play of tracks is performed within the play range explained in the “Repeat Play” sec-
tion.
1. Press the FUNCTION button and select the ITS Play mode (ITS.PLAY) in
the Function Menu.
Note:
• If no track in the current range is programmed for ITS Play, “ITS EMPTY” is displayed.
EQUALIZER CURVE
DISC
CD
TRK
DISC
F
2. Switch the ITS Play ON/OFF
with the 5/∞ buttons.
After selecting the desired repeat
play range from those referred to in
“Repeat Play” on page 26, switch
ITS Play ON.
EQUALIZER CURVE
DISC
CD
TRK
F
MCD
3. Program the desired track
with the 5 button.