Filter
Top Products
9
Basic Operation
To Listen to Music
The following explains the initial operations required before you can listen to music.
Note:
• Loading a disc in this product. (Refer to page 11.)
• Loading a cassette in this product. (Refer to page 14.)
1. Select the desired source. (e.g. Tuner)
7 Head Unit
Each press of the SOURCE selector selects the desired source in the following order:
Built-in CD player = Tuner = Tape = Multi-CD player = External Unit = AUX
7 Remote Controller
Each press of the button selects the desired source in the following order:
TUNER button : Tuner = OFF
TAPE button : Tape = AUX = OFF
CD button : Built-in CD player = Multi-CD player = OFF
Note:
• External Unit refers to a Pioneer product (such as one available in the future) that, although incom-
patible as a source, enables control of basic functions by this product. Only one External Unit can
be controlled by this product.
• In the following cases, the sound source will not change:
* When a product corresponding to each source is not connected to this product.
* When no disc is set in this product.
* When no tape is set in this product.
* When no magazine is set in the Multi-CD player.
* When the AUX (external input) is set to OFF. (Refer to page 45.)
• When this product’s blue/white lead is connected to the car’s Auto-antenna relay control terminal,
the car’s Auto-antenna extends when this product’s source is switched ON. To retract the antenna,
switch the source OFF.
Each press (up or down) changes the Source ...