Installing the Unit on a Left-Hand-Drive Car
1RWH
• When the unit is installed on a right-hand-drive car, the horizontal positions are inverted.
Inner holder
Belt
6HFXUHLQQHUKROG H UWRWKH LQQH U
FLUFXPIHUHQFHRIWKHVWHH UL QJZKHHO
ZLWKEHOW
• Fit the inner holder to the steering wheel
so that the arrow-marked side faces the
driver as shown below.
&XWWKHH[WUDSRUWLRQR IWKHEHOWDW
WKHFHQWH URIWKH LQQHUKROGHU
• Keep the cut-off portion of the belt as a
spare.
Outer holder
Screw
,QVWDOORXWHUKR OGH UR QWKH LQQH U
KROGHUDQGVHFXUHZLWKVFUHZV
• Tighten the screws with the supplied
hexagonal wrench.
Release Section
,QVWDOOWKHUHPRWHFRQWUROXQLWLQWKH
KROGHU
• When removing the remote control unit
from the holder, move the corrugated
release section toward the steering
wheel and slide the remote control unit
toward you.