,QLWL DO6HWWLQJ
Switching the Rear Speaker Output (Rear Speaker Out)
This product's rear speaker leads can be used for full-range speaker (“Full Range output”) or
Subwoofer (“Sub woofer output”) connection. If you switch Rear Speaker Lead setting to the
“Sub woofer output”, you can connect a rear speaker lead directly to a Subwoofer without using
an auxiliary amp.
3UHVVWKH)81&7,21EXWWRQDQGVHOHFWWKH5HDU6SHDNHU2XWSXWPRGH5HDU
6SHDNHU2XWLQWKH,QLWLDO6HWWLQJ0HQX
1RWH
• When no Subwoofer is connected to the rear speaker lead, select “Full Range output”.
• Even if you change to “Sub woofer output”, there is no output unless you switch the Subwoofer
Output (refer to page 59) in the Audio Menu ON.
Setting the Subwoofer Control (Sub woofer control)
When rear speaker leads are connected to full range speakers (when “Full Range output” is
selected), you can connect the RCA Subwoofer output to a Subwoofer. In this case, you can
select whether to use the Subwoofer controller's (Low Pass Filter, Phase) built-in “Internal” or
the auxiliary “External”.
3UHVVWKH)81&7,21EXWWRQDQGV H OHFWWKH6X EZRRIHU&R QWUROPRGH6XE
ZRRIHUFRQWUROLQWKH,QLWLDO6HWWLQJ0HQX
1RWH
• When the Rear Speaker Output is “Sub woofer output”, you cannot change the Subwoofer Controller.
• If you change the Subwoofer Controller, Subwoofer output and Non-Fading output in the Audio
Menu return to the factory settings.
• Even if you change this setting, there is no output unless you switch the Non-Fading Output (refer to
page 60) or Subwoofer Output (refer to page 59) in the Audio Menu ON.
6HOHFWWKHGH VLUHG5HDU6SHDNHU
2XWZLWKWKHEXWWRQV
&KDQJHWKH6XEZRR IHU
&RQWUROOHUZLWKWKHEXWWRQ V