Filter
Top Products
Black plate (9,1)
WARNING
Keep the battery out of the reach of children.
Should the battery be swallowed, immediately
consult a doctor.
CAUTION
! Use only one CR2025(3 V) lithium battery.
! Remove the battery if the remote controlis not
used for a month orlonger.
! Do not recharge, disassemble, heat or dispose
of the battery in fire.
! Do not handle thebattery with metallic tools.
! Do not store the battery with metallicmateri-
als.
! In the event of battery leakage, wipethe re-
mote control completelyclean and install a
new battery.
! When disposing of usedbatteries, please
comply with governmental regulations or en-
vironmental public institutions’ rules that
apply in your country/area.
Using the remote control
Point the remote control in the direction of the
front panel to operate.
! The remote control may not function prop-
erly in direct sunlight.
Important
! Do not store the remotecontrol in high tem-
peratures or direct sunlight.
! Do not let the remotecontrol fall onto the
floor, where it may become jammed underthe
brake or accelerator pedal.
FUNCTION button and AUDIO button
You can also select the desired mode by
FUNCTION button and AUDIO button on the
remote control. But operation of FUNCTION
button and AUDIO button on the remote con-
trol differs from the operation of
MULTI-CONTROL on the head unit. When op-
erating the remote control, switch through the
modes as described below to select the mode.
FUNCTION button operation
% Press FUNCTION to select the desired
mode (e.g., built-in CD player).
Press FUNCTION repeatedly to switch be-
tween the following modes:
Play mode (repeat play)—Random mode
(random play)—Scan mode (scan play)—
Pause (pause)—Search mode (search meth-
od)—TitleInput "A" (disc title input)
Note
Refer to Introduction ofadvanced built-in CD
player operation on page 19.
AUDIO button operation
% Press AUDIO to select the desired
mode.
Press AUDIO repeatedly to switch between
the following modes:
Standard mode
<CRD4082-A/N>9
Before You Start
En
9
English
Section
01