Filter
Top Products
Black plate (17,1)
2 Press MULTI-CONTROL to turn BSM on.
Searching is displayed. While Searching is
displayed, the six strongest broadcast frequen-
cies will be stored under preset tuning num-
bers 1–6 in the order of their signal strength.
When finished, the preset channel list ap-
pears.
# Tocancel the storage process,press
MULTI-CONTROL.
3 Use MULTI-CONTROL to select the de-
sired station.
Turn to change the station; press to select.
# You can alsochange the station by pushing
MULTI-CONTROL up ordown.
# If you do not operate thelist within about 30
seconds, the preset channellist mode is can-
celed automatically.
Note
Storing broadcast frequencieswith BSM may re-
place broadcast frequenciesyou have saved
using buttons 1–6.
Selecting stations from the
preset channel list
The preset channel list lets you see the list of
preset stations and select one of them to re-
ceive.
1 Turn MULTI-CONTROL to switch to the
preset channel list mode.
# You can alsoperform this operation by press-
ing joystick on theremote control.
2 Use MULTI-CONTROL to select the de-
sired station.
Turn to change the station; press to select.
# You can alsochange the station by pushing
MULTI-CONTROL up ordown.
# If you do not operate thelist within about 30
seconds, the preset channellist mode is can-
celed automatically.
Notes
! You can alsorecall stations assigned to preset
tuning numbers by pushingMULTI-CONTROL
up or down during thechannel display.
! You can alsorecall stations assigned to preset
tuning numbers 1–6 bypressing one of the
preset tuning buttons 1–6 on the remote con-
trol.
Tuning in strong signals
Local seek tuning lets you tune in only those
radio stations with sufficiently strong signals
for good reception.
1 Use MULTI-CONTROL to select Local.
Local appears in the display.
2 Press MULTI-CONTROL to turn local
seek tuning on.
Local seek sensitivity (e.g., Level 2) appears in
the display.
# Toturn local seek tuning off,press
MULTI-CONTROL again.
3 Push MULTI-CONTROL left or right to
set the sensitivity.
There are four levels of sensitivity for FM and
two levels for AM:
FM: Level 1—Level 2—Level 3—Level 4
AM: Level 1—Level 2
The Level 4 setting allows reception of only
the strongest stations, while lower settings let
you receive progressively weaker stations.
<CRD4082-A/N>17
Tuner
En
17
English
Section
04