Filter
Top Products
Black plate (18,1)
Playing a CD
2
2
2
1
1
1
1
These are the basic steps necessary to play a
CD with your built-in CD player. More ad-
vanced CD operation is explained starting on
the next page.
1 Track number indicator
Shows the track currently playing.
2 Playtime indicator
Shows the elapsed playing time of the cur-
rent track.
1 Press SOURCE to select the built-in CD
player.
Press SOURCE until you see Compact Disc
displayed.
# If no disc is loadedin the unit, you cannot se-
lect Compact Disc (built-inCD player). Insert a
disc in the unit. (Refer to page 13.)
2 To perform fast forward or reverse,
push and hold MULTI-CONTROL left or
right.
# If you select Rough search, pushing and hold-
ing MULTI-CONTROL left or right enables you to
search every 10 tracks in the current disc.(Refer
to Selecting the search method onpage 20.)
3 To skip back or forward to another
track, push MULTI-CONTROL left or right.
Pushing MULTI-CONTROL right skips to the
start of the next track. Pushing
MULTI-CONTROL left once skips to the start
of the current track. Pushing again will skip to
the previous track.
Note
When a CD TEXT discis inserted, the disc title
automatically begins toscroll in the display.
When Ever Scrollis set to ON at theinitial setting,
the disc title scrolls continuously. Refer to Switch-
ing the Ever Scroll on page67.
Selecting a track directly
When using the remote control, you can select
a track directly by entering the desired track
number.
1 Press DIRECT.
Track number input display appears.
2 Press 0–9 buttons to enter the desired
track number.
# You can cancelthe input number by pressing
CLEAR.
3 Press DIRECT.
The track of entered number will play.
Note
After entering the number inputmode, if you do
not perform an operation within about eightsec-
onds, the mode isautomatically canceled.
<CRD4082-A/N>18
Built-in CD Player
En
18
Section
05