Filter
Top Products
! Settings are based on the FM tuner volume
level, which remains unchanged.
1 Compare the FM tuner volume level
with the level of the source you wish to ad-
just.
2 Use Multi-Control to select SLA.
SLA appears in the display.
3 Push Multi-Control up or down to ad-
just the source volume.
Each pushing Multi-Control up or down in-
creases or decreases the source volume.
SLA +4 SLA 4 is displayed as the source vo-
lume is increased or decreased.
Notes
! The AM tuner volume level can also be ad-
justed with source level adjustments.
! The built-in CD player and the multi-CD player
are set to the same source level adjustment
volume automatically.
! External unit 1 and external unit 2 are set to
the same source level adjustment volume
automatically.
Using automatic sound
levelizer
During driving, noise in the car changes ac-
cording to the driving speed and road condi-
tions. The automatic sound levelizer (ASL)
monitors such varying noise and automati-
cally increases the volume level, if this noise
becomes greater. The sensitivity (variation of
volume level to noise level) of ASL can be set
to one of five levels.
1 Use Multi-Control to select ASL.
ASL appears in the display.
2 Press Multi-Control to turn ASL on.
Mid appears in the display.
# To turn ASL off, press Multi-Control again.
3 Push Multi-Control left or right to select
the desired ASL level.
Each pushing Multi-Control left or right se-
lects ASL level in the following order:
Low (low)Mid-L (mid-low)Mid (mid)
Mid-H (mid-high)High (high)
Audio Adjustments
En
53
English
Section
11